聚氨酯木材胶粘剂的研究(Ⅰ)——化学组成对粘接力学性能的影响

以多亚甲基多苯基多异氰酸酯（PAPI）和聚醚多元醇为原料合成了一种单组分、室温湿固化的端异氰酸酯聚氨酯胶粘剂。本研究考察了物料的化学组成对胶粘剂粘接木材的力学性能产生的影响。实验表明，与改性二苯基二异氰酸酯（MDI）相比，PAPI合成的胶粘剂对木材粘接干压剪强度提高了60％；将相对分子质量（Mw）为800、1000和2000的聚氧化乙烯二醇（PED）、Mw为300和3000的聚氧化丙烯三醇（N303和N330）以及聚四氢呋喃一氧化丙烯二醇（NG220）按优化的比例复合使用，以改性胺和有机锡复合催化，可有效提高粘接木材的干和湿压剪强度、固化速率以及木破率。Fr-IR光谱证实聚醚多元醇的-OH与PAPI的-NCO反应生成了氨基甲酸酯（-NHCOO-），但N—H和G=O均以氢键形式存在。     

以乳酸杆菌为载体的猪传染性胃肠炎病毒S基因A、D抗原位点DNA疫苗的构建

应用pRc/CMV2真核质粒骨架,先后插入猪传染性胃肠炎病毒(TGEV)S基因AD抗原位点片段和乳酸杆菌复制子基因Rep.8014,构建了pRc/CMV2-SAD-Rep.8014真核表达穿梭质粒。将其转染PK-15细胞,RT-PCR检测到S基因A D抗原位点的mRNA表达。随后,将pRc/CMV2-SAD-Rep.8014质粒电转化猪源的Lactobacillus acidophilusSW1株,成功构建了以乳酸杆菌为载体的带有TGEV S基因AD抗原位点的DNA疫苗株L.acidophilusTGES-1。本研究结合了乳酸杆菌胃肠道常在共生菌的优势和TGE呈现肠道局部发病的特点,达到益生性与免疫预防的双重功效,对乳酸杆菌口服DNA疫苗进行了有益的探索。     

基于近红外光谱法的紫花苜蓿品质综合评价

探索近红外光谱法测定紫花苜蓿品质的可行性,采用近红外光谱法与常规方法对8个紫花苜蓿品种(系)的粗蛋白、粗脂肪、粗灰分、酸性洗涤纤维、中性洗涤纤维、钙、磷和干物质等8项指标进行测定。利用配对T检验、多重比较和回归分析等方法检验近红外光谱法测定结果的可行性,运用灰色关联度分析对苜蓿品质进行综合评价。结果表明,粗蛋白、粗灰分、中性洗涤纤维、酸性洗涤纤维、磷和干物质等6项指标用近红外光谱法测定可信度较高。紫花苜蓿品质评价指标可简化为粗蛋白、粗灰分、中性洗涤纤维、酸性洗涤纤维和干物质等5项。灰色关联度分析综合表现较好的苜蓿品种(系)有WL358、WL440HQ、WL656HQ和WL366HQ。     

高温下化学锚栓粘结性能有限元模拟

化学锚栓的显著缺点就是其粘结强度在高温下会降低,从而造成后锚固性能退化。针对三面受火下型钢-混凝土后锚固连接中的锚栓受拉情况,通过有限元分析,研究了在不同外部温度下基材内部锚栓的温度梯度变化规律。计算结果表明,随着温度的升高,锚栓的抗拉承载力下降,当锚栓内部最大温度在60℃以内时,极限承载力与常温时相差不大,而当锚栓内部最大温度达到160℃时,极限承载力仅为常温时的30%。锚栓温度和粘结强度沿锚栓长度均不是均匀分布,而且随着外部温度增加而变化。     

赖草根茎分蘖相关基因LRC1的克隆及表达

运用同源基因克隆技术从典型的克隆植物赖草中克隆了其根茎分化相关基因LRC1,通过RACE获得其全长cDNA为1.598kb,开放阅读框(ORF)为1299bp,编码432个氨基酸.同源分析结果显示,赖草LRC1基因属于GRAS转录因子家族,与控制水稻分蘖及烟草侧枝发生的相应蛋白具有很高的同源性,与控制水稻分蘖的MOC1...     

Effects of cross-linking on mechanical and physical properties of agricultural residues/recycled thermoplastics composites

Maleated graft polyolefins as cross-linking agents (CAs) are widely used to improve properties of wood thermoplastic composites made by melt extrusion process. In this study, novel CAs, free isocyanate group (NCO)-terminated urethane pre-polymers (UPs) were synthesized and used in manufacturing wheat straw (WS)/recycled polyethylene (PE) composites. The composites using polymeric diphenylmethane diisocyanate (pMDI) as a CA were also made in comparison. The relationship between composite properties and the level of CA and its content as well as the composite density and hot pressing time were investigated based on wood based board processes. The results show that the internal bonding (IB) strength, the IB after soaked in boiling water for 2 h (2hWIB), the modulus of rupture (MOR), the modulus of elasticity (MOE) and the 24 h thickness of swell after absorption of water (24hTS) of the composites are significantly improved with increased CA contents and composite densities. The optimal hot pressing time is 1.1 min/mm at 180°C. The cross-linking function is attributed to the reaction between free NCOs of CA molecules with hydroxyls of WS and the moisture in the raw materials, as well as the interaction between weak polar chain segments in the CA molecules to the non-polar PE. It is highly feasible to manufacture high quality composite using WS and recycled PE as raw materials when cross-linked with just 2.5% of UPs.     

石墨烯对喹诺酮在饱和多孔介质中运移的影响

为研究石墨烯（Graphene,GN）对喹诺酮类抗生素在地下水中运移的影响,以环丙沙星（Ciprofloxacin,CIP）和诺氟沙星（Norfloxacin,NOR）作为两种典型的喹诺酮类抗生素污染物,通过批量吸附实验和砂柱实验研究GN对CIP和NOR在饱和多孔介质中运移的影响。吸附实验结果表明,GN对两种抗生素污染物均具有较好的吸附性能,GN对CIP和NOR的Langmuir最大吸附容量分别为270.68 mg·g^-1和178.36 mg·g^-1。砂柱实验结果表明：随着多孔介质中GN含量从10 mg增加到80 mg,CIP和NOR在一维砂柱中的迁移能力降低;随着流速和电解质浓度（Na⁺和Ca²⁺）的增大,回收率逐步升高,CIP和NOR的运移能力也逐步增强。根据BDST模型对不同条件下的CIP和NOR在一维砂柱中的运移过程进行了模拟和预测,模型对穿透时间的预测值与实验值接近,表明BDST模型能较好地预测多孔介质中GN对CIP和NOR迁移能力的影响。     

Comparison of stem borer damage and resistance in semidwarf Indica rice varieties and prototype lines of a new plant type

The rice (Oryza sativa L.) “new plant type” (NPT), currently under development at the International Rice Research Institute, Philippines, differs in genetic background and plant architecture from the semidwarf Indica varieties that now predominate in tropical lowland areas. The NPT is derived from tropical Japonica germplasm and has fewer and larger stems and panicles than do semidwarf Indica varieties. We compared stem borer damage and resistance in NPT lines and semidwarf Indica varieties under field and greenhouse conditions. Stem borer damage in field plots of the NPT lines IR65564 and IR68011 was higher than in plots of the Indica varieties IR64 and IR72 during the 1999 dry season but not the wet season. In both seasons, IR68011 had higher densities of egg masses of the striped stem borer (SSB, Chilo suppressalis) than did the other three entries. There were no consistent differences among entries in density of egg masses of the yellow stem borer (YSB, Scirpophaga incertulas). In the 2000 wet season, stem borer populations were low, but SSB egg masses were found only on IR68552-100, the only NPT line in the experiment. In all three seasons, NPT lines had higher proportions of SSB larvae and pupae in stems after harvest, and lower proportions of YSB, than did Indica varieties. In artificially infested field cages, SSB larval survival was highest on reproductive stage plants of IR68011 in the 1999 dry season and there was a trend of higher YSB adult weight on IR68011 in the 1999 dry and wet seasons. Three NPT lines and three Indica varieties evaluated under greenhouse conditions showed no consistent differences in resistance to either stem borer species, as measured by percent survival from egg to adult and female development time and weight. The lack of consistent differences in stem borer survival and development between the NPT lines and Indica varieties was contrary to the expectation that the morphology of the NPT would render it more susceptible to stem borers. Our results indicate that NPT lines are not consistently or strongly more susceptible to stem borers than are improved Indica varieties and suggest that ovipositional attractiveness to SSB is a factor contributing to higher stem borer damage to some NPT lines.     

正交试验优选地锦草颗粒成型工艺

为优选地锦草颗粒成型工艺,以可溶性淀粉用量、乙醇浓度、阿司帕坦用量为考察因素,以制粒难易程度、外观、粒度、溶化性、口感及其综合评分为指标,采用L9（34）正交试验优选成型工艺。最佳成型工艺是可溶性淀粉用量为70%,乙醇浓度为75%,阿司帕坦用量为0.50%,测得临界相对湿度为65%。     

山东省牛主要污染物产生量估算及环境效应研究

[目的]估算了山东省牛粪便的总量及其养分的负荷量和占当年排泄污染物的比例。[方法]根据2010年山东省和各地市牛存栏的行业和统计局两套数据和2012年行业数据,通过计算参数和估算的方法算出了牛粪产生总量。[结果]全省牛粪总共约在7000~9700万 t 之间,占当年所有畜禽粪便产生量的34.07%~37.37%之间,即三分之一以上。德州、济南两市单是牛粪便的土地承载量分别达到了29.7 t/hm2和27.4 t/hm2,接近了欧洲标准30 t/hm2的限量值。[结论]应该引起我们对全省牛业发展方式和发展战略的高度重视。